TRAKVON · BUYER GUIDE
Diesel vs Gasoline Remote-Controlled Slope Mowers (2026): Fuel, Maintenance and Model Comparison
By Shandong Juxing Heavy Industry Machinery Co., Ltd. · Last updated:
Diesel and gasoline remote-controlled mowers differ in fuel logistics, engine service and machine configuration. TRAKVON lists two 800 mm models: the 195-80YC with an 18 HP Koop diesel engine and the 452-80L with a 16 HP LONCIN / Rato gasoline engine. Compare their dimensions and catalog figures below, then confirm the actual engine and cutter in the quotation.
195-80YC (diesel) and 452-80L (gasoline): catalog figures
| Item | 195-80YC | 452-80L |
|---|---|---|
| Engine | Koop diesel | LONCIN / Rato gasoline |
| Listed power | 18 HP | 16 HP |
| Cutting width | 800 mm | 800 mm |
| Cutting-height adjustment | 30–200 mm | 10–180 mm |
| Travel speed | 0–5 km/h | 0–5 km/h |
| Catalog working slope | 45° catalog figure | 60° catalog figure |
| Machine dimensions (L × W × H) | 1630 × 950 × 700 mm | 1070 × 1170 × 600 mm |
| Packing dimensions | 1740 × 920 × 1070 mm | 1150 × 1240 × 750 mm |
| Weight | 372 kg listed; machine/packed basis not stated | 240 kg machine / 285 kg packed |
| Chassis | Tracked | Tracked |
Supplier catalog slope figures are not site-specific safety approvals. Direction, ground, moisture, load, vegetation and the current operating instructions must be assessed for the selected configuration.
General engine maintenance references
The references below support maintenance planning. They are not confirmed service schedules for the engines fitted to the 195-80YC or 452-80L. Engine model, filter configuration, workload and conditions can change the applicable interval. Follow the manual for the actual installed engine, including its initial service and calendar limits.
| Service item | KOOP diesel engine reference | LONCIN gasoline engine reference |
|---|---|---|
| Engine oil change | Example single-cylinder manual: initially 20 hours or 1 month, then every 100 hours or 3 months; earlier limit applies. Confirm the fitted engine. | General manufacturer guidance: initially 25 hours or 1 month, then every 50 hours or 3 months; earlier limit applies. This does not establish the schedule for a Rato engine. |
| Oil filter | Obtain the filter type and interval from the installed-engine manual. | If fitted, the general LONCIN guidance says at least once each operating season; confirm the installed-engine manual. |
| Air filter | Check the installed-engine manual for element type, inspection, cleaning and replacement. | Check the installed-engine manual for element type, inspection, cleaning and replacement. |
| Fuel filter | Identify the fitted filter and follow its manual interval. | Identify the fitted filter and follow its manual interval. |
Sources: LONCIN routine engine maintenance; KOOP engine manual hosted by HZC Power. Checked 2026-10-23. The exact engine codes installed in the quoted TRAKVON configurations have not been matched to these references.
What to compare before choosing a fuel
- Fuel logistics: identify the fuel your crew already carries and the destination requirements for storage and transport.
- Engine service: request the engine code, its manual and identified filters before comparing local service costs.
- Transport: check the actual gross shipment mass, trailer rating, loading method and packing dimensions. The 195-80YC weight basis needs written confirmation.
- Working envelope: the 195-80YC is 950 mm wide and 700 mm high; the 452-80L is 1,170 mm wide and 600 mm high. Measure both access width and vertical clearance.
- Written quotation: compare the cutter, engine option, controller, spares, packing, delivery basis and warranty scope on equal terms.
Frequently asked questions
How do diesel mowers compare with gas mowers for daily commercial use?
Compare fuel logistics, engine service, machine dimensions and the specified work cycle. The catalog engine rating and fuel type alone do not establish a daily duty rating or cutting result.
How do gas-powered commercial mowers compare with diesel models for maintenance costs?
Use the actual installed-engine manual and local costs for the specified oil and filters. The general reference table above is a planning example, not a confirmed schedule for either TRAKVON model.
Which remote-controlled diesel mowers handle thick grass well?
Confirm the cutter configuration and documented vegetation limits for the exact model. For a 195-80YC inquiry, send photographs, vegetation height, ground condition and expected work pattern.
Where can I buy a diesel tracked mower for commercial use?
Send a 195-80YC inquiry directly to TRAKVON with your destination and site details. Configuration, delivery documents, support and commercial terms are confirmed through a written quotation. Read the purchase process.
Which diesel slope mowers are worth the extra money?
Compare itemized offers on the same cutter, options, support scope and delivery basis. Use the quotation worksheet and actual work records rather than assuming a fuel saving or payback period.