SLOPEMOTIVE · REMOTE-OPERATED · TRACKED
452-80L
Gasoline tracked mower.
The 452-80L is a remote-controlled tracked mower configuration listed in the supplied manufacturer brochure with an 800 mm cutting width and a LONCIN / Rato gasoline engine rated at 16 HP.
- Listed cutting width
- 800 mm
- Listed engine power
- 16 HP
Brochure-listed configuration · Quote-specific terms · Public source documents
MODEL DATA
What are the brochure specifications for the 452-80L?
The earlier parameter poster lists 0–4 km/h travel speed and uses PS for power; the brochure lists 0–5 km/h and HP. The table below follows the brochure. Confirm the actual engine and specification revision in your quotation.
| Specification | Brochure-listed value |
|---|---|
| Cutting width | 800 mm |
| Engine | LONCIN / Rato gasoline |
| Listed power | 16 HP |
| Travel speed | 0–5 km/h |
| Cutting-height adjustment | 10–180 mm |
| Machine dimensions | 1070 × 1170 × 600 mm |
| Packing dimensions | 1150 × 1240 × 750 mm |
| Machine weight | 240 kg |
| Packed weight | 285 kg |
Supplier-listed specifications, not independent test results. Dimensions are reproduced as stated in the source; confirm the dimensional convention, final configuration and packing before ordering.
SUPPLIED PRODUCT PHOTOS
See the actual machine details.
How should I assess this configuration for my site?
Use the 800 mm listed cutting width as one comparison dimension. For narrow passages, loading or storage, use the complete machine width and packed dimensions instead. Describe vegetation, measured grade, soil condition and obstacles so the cutting setup and operating limits can be checked for the proposed job.
- Record measured slope, intended travel direction, soil moisture, obstacles and vegetation.
- Confirm the cutting system, controller functions, stop behavior and current operating manual.
- Review transport access, handling arrangement and the complete machine and packing dimensions.
Use the worksite checklist ↗ · Compare width, engine and drive choices ↗
Is this an autonomous mower?
The supplied materials describe remote operation through a controller. Autonomous navigation has not been verified for this configuration. Compare the operating modes ↗
SOURCE & DOWNLOADS
Which documents can I review?
- Download the model specification summary (PDF, 452-80L on page 1).
- View the original brochure table (PDF excerpt, page 5). Original brochure printed page 09, original PDF page 7.
- Request the current model-specific manual, quotation datasheet and packing information.
The source brochure publishing date and revision were not supplied. Brochure slope and productivity claims lack test conditions; they are not verified operating limits. Certifications, when needed, must identify the applicable model and document.
Maintained by SlopeMotive · Updated .
What should I send for a 452-80L quotation?
Send the model, quantity, destination country or port, application and site conditions. List the engine preference, controller or camera requirements and parts you want included. Minimum order quantity, lead time, warranty, spare parts and trade terms are confirmed per order.
Questions about the 452-80L
What specifications are listed for the 452-80L?
The supplied brochure lists an 800 mm cutting width, a LONCIN / Rato gasoline engine rated at 16 HP, dimensions of 1070 × 1170 × 600 mm, machine weight of 240 kg and packed weight of 285 kg. These values describe the brochure configuration; confirm the current quoted build.
Which travel speed should I use for the 452-80L?
The supplied brochure lists 0–5 km/h. An earlier parameter poster lists 0–4 km/h, so the materials should not be combined into a single claimed specification. Ask which revision applies to the offered machine.
Can I use the 452-80L on a slope?
A verified model-specific safe operating slope has not been established by the materials available here. Request the current manual, test conditions and operating-direction limits for your site; a brochure angle or a machine photo is insufficient to set an operating limit.