SLOPEMOTIVE · REMOTE-OPERATED · TRACKED
195-80YC
Diesel tracked mower.
The 195-80YC is a remote-controlled tracked mower configuration listed in the supplied manufacturer brochure with an 800 mm cutting width and a Koop diesel engine rated at 18 HP.
- Listed cutting width
- 800 mm
- Listed engine power
- 18 HP
Brochure-listed configuration · Quote-specific terms · Public source documents
MODEL DATA
What are the brochure specifications for the 195-80YC?
The brochure lists a total weight of 372 kg without specifying whether it is bare-machine or packed weight. Do not use this as a confirmed gross shipping weight. Ask for the actual packing dimensions and gross weight of the quoted configuration.
| Specification | Brochure-listed value |
|---|---|
| Cutting width | 800 mm |
| Engine | Koop diesel |
| Listed power | 18 HP |
| Travel speed | 0–5 km/h |
| Cutting-height adjustment | 30–200 mm |
| Machine dimensions | 1630 × 950 × 700 mm |
| Packing dimensions | 1740 × 920 × 1070 mm |
| Brochure-listed weight | 372 kg; bare-machine or packed basis not specified |
Supplier-listed specifications, not independent test results. Dimensions are reproduced as stated in the source; confirm the dimensional convention, final configuration and packing before ordering.
SUPPLIED PRODUCT PHOTOS
See the actual machine details.
How should I assess this configuration for my site?
Compare this diesel configuration with the gasoline 452-80L when an 800 mm brochure-listed cutting width is relevant. Consider the fuels available at your site, engine-maintenance support, whole-machine dimensions and the proposed cutter setup. The engine type alone does not establish better productivity, slope capability or suitability for woody vegetation.
- Record measured slope, intended travel direction, soil moisture, obstacles and vegetation.
- Confirm the cutting system, controller functions, stop behavior and current operating manual.
- Review transport access, handling arrangement and the complete machine and packing dimensions.
Use the worksite checklist ↗ · Compare width, engine and drive choices ↗
Is this an autonomous mower?
The supplied materials describe remote operation through a controller. Autonomous navigation has not been verified for this configuration. Compare the operating modes ↗
SOURCE & DOWNLOADS
Which documents can I review?
- Download the model specification summary (PDF, 195-80YC on page 2).
- View the original brochure table (PDF excerpt, page 4). Original brochure printed page 08, original PDF page 6.
- Request the current model-specific manual, quotation datasheet and packing information.
The source brochure publishing date and revision were not supplied. Brochure slope and productivity claims lack test conditions; they are not verified operating limits. Certifications, when needed, must identify the applicable model and document.
Maintained by SlopeMotive · Updated .
What should I send for a 195-80YC quotation?
Send the model, quantity, destination country or port, application and site conditions. List the engine preference, controller or camera requirements and parts you want included. Minimum order quantity, lead time, warranty, spare parts and trade terms are confirmed per order.
Questions about the 195-80YC
What specifications are listed for the 195-80YC?
The supplied brochure lists an 800 mm cutting width, a Koop diesel engine rated at 18 HP, travel speed of 0–5 km/h and machine dimensions of 1630 × 950 × 700 mm. Confirm the quoted engine, cutter setup and revision before ordering.
Is 372 kg the shipping weight of the 195-80YC?
The brochure lists 372 kg but does not identify it as bare-machine or packed weight. Ask for the verified gross packing weight, dimensions and packing arrangement for your order.
Is the 195-80YC more suitable than a gasoline mower?
Compare your fuel supply, maintenance support, machine dimensions, cutter configuration and documented operating conditions. The brochure identifies the engine type, but it does not establish comparative efficiency or a performance advantage over the gasoline 452-80L.